Elektroniske Displays

MagLine magnetic displays for precise visualization of measured values
The displays for magnetic measuring systems have been purpose-designed for connection to passive MagLine magnetic sensors. Together with the magnetic sensors and magnetic tapes or magnetic rings the magnetic displays form a self-contained measuring system for direct display of measured values.
Produkt typeDisplay,
opløsning
Produkt gruppe, nøjagtigheds klasseForsyning,
interface
Sensor
Elektronisk Display MA100/212-digit LCD dot matrix, 0.001 mmMagLine Micro
10 µm
24 V, 110 V, 230 V, RS232, RS485MS100/1
Elektronisk display MA501DOT-matrix display, 0.01 mmMagLine Basic
100 µm
24 V with backup, RS485integrated
Elektronisk display MA50212-digit LCD dot matrix, 0.01 mmMagLine Basic
50 µm
24 V, 110 V, 230 V, RS232, RS485MS500
Elektronisk display MA503/2LCD decimal and fraction/inch, 0.01 mmMagLine Basic
100 µm
3 V battery (autonomous)MS500H
Elektronisk display MA504/16-digit LCD, 0.01 mmMagLine Basic
100 µm
3 V battery (autonomous)MS500H
Elektronisk display MA5065-digit LED, 0.01 mmMagLine Basic
100 µm
24 VMS500
Elektronisk Display MA50512-digit LCD dot matrix, 0.01 mmMagLine Basic
50 µm
24 V, 110 V, 230 V, RS232, RS485MSA
Elektronisk Display MA508/1LCD, 0.01 mmMagLine Basic
100 µm
battery integratedintegrated
Elektronisk Display MA5615-digit LED, 0.01 mmMagLine Basic
100 µm
24 VMSA
Elektronisk Display MA5646-digit LCD, 0.01 mmMagLine Basic
100 µm
10 - 30 V, backup-battery (3 V)integrated
Elektronisk display MA523/14-row graphic LCD, 0.001 mmMagLine Micro,
MagLine Basic
10 µm, 50 µm
10 - 30 V, Power supply in the accessoriesMS100/1, MS500
Elektronisk Display MA503WLLow-power LCD decimal and fraction/Inch, 0.01 mmMagLine Basic
100 μm
3 V batteryintegrated
Measuring displays for incremental measurement as well as absolute and quasi-absolute measurement
Suitable measuring displays are available for incremental, absolute and quasi-absolute measuring methods. On the last version the power supply is ensured by an integrated battery with a very long service life. With the battery buffer the measurement values are not lost, even when the power supply is interrupted. The displays vary between LED and LCD displays, whereby some have a very low consumption and a high contrast.

When selecting the display, pay attention to the following parameters:
Accuracy class
Resolution
Display with either five, six or twelve digits; some also with decimal and fractions/inches output
Optional feature on some displays: Serial interface

Some displays work with a magnetic sensor that is already firmly connected. This results in a compact component which already contains all necessary measuring functions and that can be used directly at the measurement point. A plug connection between the display and magnetic sensor is sometimes also possible.

Displays in the MagLine product families
The MagLine displays are assigned to the various product families of the MagLine range. MagLine Macro is a special product for very long measuring distances: In this case the SIKO displays are not used directly at the site, but the magnetic sensors support signal evaluations via digital outputs and forward the signals to downstream electronic units or higher level control units.